Description

• Built-in 9dBi 2×2 dual-polarized directional MIMO antenna
• Adjustable transmission power from 0 to 27dBm 500mw
• System-level optimizations for more than 5km long range wireless transmission
• TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
• Centralized Management System – Pharos Control
• AP Client Bridge Repeater AP Router AP Client Router (WISP) operation modes
• Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

•  

  HARDWARE FEATURES
  Processor		Qualcomm Atheros 560MHz CPU, MIPS 74Kc
  Memory		64MB DDR2 RAM, 8MB Flash
  Interface		1 10 100Mbps Shielded Ethernet Port (Passive PoE in) 1 Grounding Terminal 1 Reset Button
  Power Supply		Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC
  Power Consumption		10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
  Dimensions ( W x D x H )		8.8 x 3.1 x 2.4 in.
  Antenna Type		Built-in 9dBi 2×2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) 35° (E-Plane)
  Protection		15KV ESD Protection 6KV Lightning Protection
  Enclosure		Outdoor ASA stabilized plastic material IPX5 waterproof Certification

  WIRELESS FEATURES
  Wireless Standards		IEEE 802.11b g n (with Pharos MAXtream disabled)
  Proprietary Protocol		TDMA Mode (with Pharos MAXtream enabled)
  Wireless Speeds		Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic)
  Frequency		2.4~2.483GHz
  Transmission Power		27dBm 500mw (1dBm step adjustable)

  SOFTWARE FEATURES
  Wireless Configurations		Pharos MAXtream TDMA Technology 802.11b g n modes Selectable Channel Width: 5 10 20 40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable Disable Security: WPA WPA2, WPA-PSK WPA2-PSK (AES TKIP) Encryption, 64 128 152-bit WEP Encryption SSID Broadcast Enable Disable Multi-SSID with VLAN Tagging (AP mode only) Distance ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval RTS Threshold Fragmentation > Threshold DTIM Interval AP Isolation Short GI Wi-Fi Multimedia
  Management		Discovery and Remote Management via Pharos Control application HTTP HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server
  System Tools		Wireless Signal Quality Indicators: Signal Strength Noise Transmit CCQ CPU Memory Monitors: Throughput Stations Interfaces ARP Routes WAN DHCP Spectrum Analyzer Speed Test Ping Traceroute
  System-level Optimizations		Optimized IGMP Snooping Proxy for multicast applications Hardware watch dog

  POE ADAPTER FEATURES
  Dimensions(W x D x H)		4.3 x 2.2 x 1.3 in
  Interfaces		1 AC Jack with Earth Ground 1 10 100Mbps Shielded Ethernet Port (Power + Data) 1 10 100Mbps Shielded Ethernet Port (Data)
  Button		Remote Reset Button
  Power Status LEDs		Green
  Input		100-240VAC, 50 60Hz
  Output		24VDC, 0.6A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
  Efficiency		> 80%
  Certifications		FCC

  OTHERS
  Certification		FCC, RoHS, IPX5
  Package Contents		Outdoor Wireless CPE 24VDC Passive PoE Adapter Pole Mounting Straps AC Power Cord Installation Guide
  Environment		Operating Temperature: -40℃~70℃ (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing

  Title	Default Title